Fryers Lane – ExpoEM North 2016

It had been a year since I exhibited Fryers Lane (as a work in progress) at Scaleforum in 2015 when, in September 2016, I had the opportunity to exhibit the layout in a much more finished form at ExpoEM North.

Here is a brief recap of how the layout came about and a reflection on how various elemnts of it performed.  I’ll start by saying that I’ve had a P4 itch to scratch for a while, I’d also been slowly building up a collection of air braked freight stock and a few locos to suit a late 80s setting.  The Scalefour Society’s Standard Gauge Workbench provided the impetus to put these two things together in a layout that would be easily transported and not require too many operators.

As well as testing out my skills with the finer tolerances of P4, there were a number of things that I wanted to try out for future layouts and this seemed a reasonable place to try:

  • Steel rail
  • Servos driven turnout operation
  • Foam track underlay
  • Hex Frog Juicer to switch crossing polarities
  • Cameo layout design on a single monocoque baseboard
  • LED lighting (integrated into the board design)

15922835400_7815fa32c5_k

I’ve found steel rail challenging at times, but in use, it is (so far) proving to be very reliable and require little cleaning.  Yes, I did find soldering droppers to it to be a bit of a pain and yes, filing vees and switch blades takes a little longer, but on reflection I think I’ll be using it again in the future.  Interesting quirk we noted on Sunday of ExpoEM North was that the nickel silver rail in the fiddle yard was filthy, enough to cause locos to stutter, whereas there were no such problems on the steel.  I wondered if the different properties of the materials was somehow the cause of this?  Easy enough to deal with though.  The Frog Juicer works well but does have a slightly annoying tendency to arc for a split second when a wheel runs onto a vee of opposing polarity.  For this reason, I’ll probably switch (pun intended) back to more conventional methods next time as I feel this visual impact negates any benefits derived from (slightly) simplified wiring.

The servos are great.  Cheap, reasonably easy to set up and no issues.  Definitely on the list to use again.  Can’t say the same for the underlay.  This was the black foam stuff from C&L.  IMHO, it is too soft and has a bit too much give in it.  Back to cork (or maybe thin ply or MDF next time I think).

29661100532_846ad25011_k

The “cameo” baseboard has worked well; but the dimensions of this board are approaching the maximum practical size for a board that can be handled without assistance, particularly within the confines of a 200 year old cottage with its low ceilings.  It’s on the heavy side too; although that may partly be down to my use of 12mm ply (because I had a spare sheet left over from another job).  I might use something thinner (9mm ply?) for all but the board ends if I was doing it again.  The lighting probably deserves a separate blog post, as it was quite a journey, but overall it’s working well.

So, what next?  I don’t subscribe to the view that “a layout is never finished”.  I think it’s important to aim to push your standards, but know when a particular project has gone as far as it can go. Fryers isn’t there yet, there is more scenic work to complete, namely to fill up the skyline along the back of the layout and to improve how hidden the exits to the fiddle yards are.

29773542505_7e83007fda_k

Beyond that there is (always) the tempting prospect of extending the layout.  Another board at the right hand end would allow me to model the level crossing, the signal box and maybe even the goods shed (although that would be likely to be disused).  On reflection, I think if I wanted to do that I’d be better starting again, with new baseboards of a different design as a longer layout would benefit from deeper baseboards.  That would then start to take me away from the original aim

For various reasons, I’d slightly gone off the idea of exhibiting and was thinking my next project would be a home based layout, not intended for the exhibition circuit.  However, exhibiting at ExpoEM North reminded that I do enjoy doing shows and of the advantages of small layouts which can travel in a car and only need one or two additional operators.  One idea I have buzzing around in my head it to build alternative modules (of similar dimensions to Fryers) that utilise one or both of the existing fiddle yards, now I have some that actually work!

Advertisements

Half an hour at Foundry Lane

A few photos of 20073 shunting the sidings at Foundry Lane, here we see it arriving with a brake van, there being no inbound traffic on this afternoon’s trip working

After dropping the brake van in the sidings, the loco headed off to the steel terminal, propelling a bogie bolster which had arrived on the morning trip and returning with some empty wagons which had been unloaded during the morning

The brake van is collected and added to the back of the wagons.  The loco then ran round, ready for the return working

The trip working then left, heading back towards the mainline

We grab one last photo before she disappears under the bridge and into the gloom beyond

The next exhibition appearance for the layout is Expo EM North on 15th and 16th September at the new venue of George H Carnall Leisure Centre, M41 7FJ.

P4 Track Co Turnout

I had a couple of days off work this week and thought this might allow a bit of modelling time.  It did, but nowhere near as much as I would have liked.  The current list of tasks for my WLL project is broken down into rolling stock, buildings (& other structures) and track.  Having done some work on buildings and rolling stock recently I thought maybe it was time to look at track and I managed to find a couple of hours to have a go at putting together one of the P4 track company turnout kits.

I had high expectations for these products, in fact it would be fair to say they were one of the things which attracted me to building the layout in P4 rather than EM.  They have small pips on the timbering which allow the chairs to locate in the correct position.  I’ve not used steel rail or plastic timbering before and have previously made up my own common crossings and switch rails so these kits are quite different to anything I’ve built before.  The first one (of three which I’ll need) is a B8  left-hand turnout, which will form the junction of the former goods avoiding lines at the rear of the layout.

Overall I found construction to be a quite a pleasant experience, although must admit I struggled a little to follow the text of the instructions (I’m never good with instructions and was confused further by my LH kit having a RH template in the pack, as the astute will have already noticed in the photo above!).  Despite the pips on the timbers, a set of gauges are still required to ensure accurate alignment of the rails, mine came from EMGS (who can supply these to suit 18.2mm and 18.83mm gauge to members of the society).  As designed the kit is intended to make a straight turnout, but I found it easy enough to introduce a gentle curve to match the drawing I have prepared in Templot (which is based on a scan of a 1:500 plan of the station).  I suspect this may be more of a challenge when it comes to the C10 turnout for the down platform though.

At this stage there are still some details to add.  The detail in the chair components is far superior to the C&L components I’ve used previously and overall I’m very impressed.

Testing with a spare coach bogie seems to confirm all is well; hopefully I’ll find a little time over the weekend to add the remaining chairs.  I think it probably took about 3 hours (excluding tea breaks) from opening the pack to get to this stage; probably another hour on top of that to add the remaining details – although this should reduce as familiarity and confidence with the product increases.  At £35 each they aren’t cheap, but as I only need a few, I think the advantages in prototype fidelity and ease of assembly do make them good value.

Pies Galore?

The latest social evening for the group was held at the Sun Inn, Stafford, where much hilarity was had and pies eaten. Ok so it was only one pie but several of the group sampled it thanks to the generosity of Mr Y (or was it the wish to keep his sylph like form?!). Everyone there agreed that the refreshments and entertainment (kindly supplied by dint of leopard print) were excellent and even Mr C was seen to smile during the evening! Evidence is hereby given to the suitability of the pie presentation.

Local Pork Pie on offer here!

First-sprung COV AB

For a while now I’ve been accumulating some of those nice Bachmann air braked wagons.  At some point in the future I might even build a layout on which to run them, but for now they are gathering dust.

With my planned move to P4, I thought it would be a good idea to have a go at springing one of these just to get a feel for how the Bill Bedford spring units work and maybe add a few other detail improvements too.  The Bachmann axleguard units are screwed in place, so are easily removed leaving a clear flat floor to mount the replacement units on.  The spring units folded up easily, I changed the spring wire provided for some 0.3mm phoshor bronze wire.  The Brassmasters axle spacing gauge came in handy for getting everything corrective aligned.  The wheels (these are Gibson EM ones) were fitted with brake discs by S Kits (from Nairnshire Modelling Supplies).  The bearings are left overs from Chivers MDV kits.

The buffers were also replaced using sprung 18″ Oleo buffers from 51L, which I fitted at our modelling night last week.

After touching in the paint on the buffers, fitting some brake pipes and a light weathering, here is the end result:

Technically it’s slightly too modern to put in an appearance on Foundry Lane, but I think it will find its way into the stock box for the next exhibition.

Ruddles and chips!

The group held the first social get together last night at the Wetherspoon’s Picture House in Stafford where a convivial evening was had discussing many topics, some of which had connections to railways and modelling. It was generally agreed that it was a good choice with Ruddles bitter at £1.60 a pint and excellent chips to scoff. Another recruit to the group attended, Andy York of RMWeb fame who will bring another aspect to the group, oh and and lots of gossip!

The next workshop evening is to be a Wednesday evening, except I can’t remember whether it’s next week or the week after! Hopefully one of the other group members will remind me…?